Aerobic Septic System Installation
Professional aerobic treatment unit installation service for residential and commercial properties across your area
5 Highlights on Aerobic Septic System Installation
- Advanced Wastewater Treatment: Our aerobic septic system installation delivers secondary and tertiary treatment levels that far exceed conventional anaerobic septic tanks. Each aerobic treatment unit is designed to use forced air from a blower or compressor to circulate dissolved oxygen, accelerating microbial decomposition of solids, reducing BOD (biochemical oxygen demand), and producing cleaner effluent before it reaches your drain field or drip irrigation field. This type of system handles waste more efficiently than traditional gravity-fed alternatives.
- Full Permitting and Site Evaluation: We handle every septic permit application, coordinate with your local health department, and schedule the required percolation test. Our licensed installers carry out a complete site evaluation to determine soil permeability, water table depth, setback distances, and property line requirements before we excavate a single trench.
- Complete System Components: Each installation includes the aeration chamber, clarifier, settling chamber, effluent filter, chlorinator or UV disinfection unit, control panel with alarm, float switch, and all inlet and outlet pipes. Everything needed for a complete system is included in our scope.
- Certified and Licensed Technicians: Our installers carry current state certifications and manufacturer training credentials. They grade, trench, compact, and backfill to exact specifications outlined in your as-built drawing.
- Long-Term Reliability: We commission every aerobic system with full testing, dissolved oxygen sampling, and coliform monitoring to confirm compliant operation from day one. Your system will be working properly from the start.
Why Choose Our Aerobic Septic System Installation
Aerobic septic system installation is a specialized discipline that demands precise engineering, licensed expertise, and strict regulatory compliance. Action Septic Service has built a reputation as a trusted, top-rated contractor in this field. Our years of experience are what set us apart.
We employ certified technicians who install aerobic treatment units daily. They don’t dabble in this work. They specialize in it. Every installer on our crew understands the relationship between aeration chamber sizing, dosing cycle timing, and effluent quality. Using that knowledge, they make decisions that will ensure your system treats wastewater reliably and will last for decades.
Our qualifications set us apart. We maintain active licenses, carry full insurance, and have manufacturer certifications from the leading aerobic system brands. We also perform our own site evaluations and perc tests, so you deal with one qualified contractor from permit to commission.
We stand behind every aerobic septic system installation with a workmanship guarantee. If any component we installed fails due to our labor within the warranty period, we fix or replace it at no charge. That commitment covers everything from the submersible pump and diffuser to the chlorinator and control panel. We handle repairs and replacing parts without additional cost to you.
Action Septic Service also provides post-installation maintenance contracts. We’ll come back on schedule to inspect, sample effluent, and service your aerobic treatment unit so it stays compliant with environmental regulations. A properly maintained system gives you a professional partner for the full life of your system.
Signs You Need Aerobic Septic System Installation
Aerobic septic system installation becomes necessary under several specific conditions. Recognizing these signs early saves you money, protects groundwater, and keeps your property compliant with health department regulations. Acting in time can prevent costly damage and reduce the risk of environmental violations.
Your Conventional Septic System Keeps Failing: Repeated drain field saturation, effluent surfacing in your yard, or persistent sewage odors near your leach field all indicate your anaerobic system can’t treat the wastewater load. Slow drains and plumbing backups are also warning signs. A conventional gravity-fed tank paired with a failing absorption field often needs full replacement with an aerobic treatment unit that produces cleaner, treated effluent before discharge. Without municipal sewer access, upgrading prevents your system from breaking down further.
Your Soil Failed the Percolation Test: Properties with impermeable clay, high water tables, or shallow bedrock can’t support a conventional subsurface drain field. An aerobic system paired with a drip irrigation field or spray head distribution network works on sites where standard leach fields won’t percolate properly. The advanced treatment level compensates for poor soil permeability. You’ll see the difference in effluent quality immediately.
You’re Building on a New Lot Without Sewer Access: Any new residential or commercial construction in an unsewered area requires an onsite decentralized wastewater system. If you think you’re ready to build but need a septic solution, an aerobic septic system installation gives you the highest treatment quality available for onsite use, often meeting tertiary treatment standards.
Your Health Department Requires an Upgrade: Regulatory changes sometimes reclassify properties as non-compliant. If your inspector has flagged your existing cesspool, holding tank, or aging septic tank, installing a new aerobic treatment unit brings your property into full compliance with current environmental regulations. Contact us to learn more about your upgrade options.
You’re Expanding Your Home or Business: Adding bedrooms, bathrooms, or commercial capacity increases wastewater volume. Your existing system may lack the treatment capacity needed to handle the additional influent. A properly sized aerobic septic system installation accommodates the higher flow rate and prevents overloading, whether for your home or business.
Our Aerobic Septic System Installation Process
Aerobic septic system installation follows a precise sequence that our crew executes on every project. Here’s how we provide professional installation from start to finish.
Step 1 — Site Evaluation and Perc Test. We visit your property, assess soil conditions, measure setbacks from wells, gas lines, and property lines, and conduct a percolation test. We check the water table depth and map the ideal location for your aerobic treatment unit and effluent dispersal area. Data collected is used to finalize your system design.
Step 2 — Permitting. We prepare and submit your septic permit application to the local health department. We fill out every required form and submit the site plan, system specifications, and soil data. We don’t proceed until the permit request is approved.
Step 3 — Excavation and Grading. Our excavator and backhoe operators dig the tank pit and trench all lateral lines. They grade the site to ensure proper drainage and gravity flow where the design requires it. We take care to minimize disruption to existing landscaping.
Step 4 — Tank and Component Installation. We set the aerobic treatment unit, connect the aeration chamber, clarifier, settling chamber, and effluent filter. We install the air compressor or blower, chlorinator, control panel, alarm, float switch, and all piping. Every tee fitting, cleanout, and inspection port goes in per the manufacturer’s specifications to complete this phase of the project.
Step 5 — Effluent Dispersal System. We install the drip irrigation field, spray heads, or pressure manifold and lateral lines based on your approved design. Geotextile fabric and drainrock or aggregate go in where specified.
Step 6 — Backfill, Compaction, and Commission. We backfill carefully around all components, compact the soil, install risers and access lids, then commission the system. We test dissolved oxygen levels, verify pump and timer operation, and confirm the alarm functions. Within hours, we finish the job. You receive your as-built drawing and a full walkthrough of your new aerobic septic system, saving you from future guesswork about your installation.
Brands We Use
Action Septic Service installs aerobic septic systems from the most reliable, best-performing manufacturers in the industry. We select brands based on treatment efficiency, component durability, and available warranty support.
- Clearstream Wastewater Systems
- Norweco
- Jet Inc.
- Consolidated Treatment Systems
- Fuji Clean USA
- Bio-Microbics
- Orenco Systems
- Delta Environmental
- Hydro-Action
- Aqua-Klear
Your safety and your groundwater quality depend on correct installation. We don’t cut corners on either.
Other Services
| aerobic septic system installation | aerobic treatment unit installation | onsite wastewater treatment system install |
| install aerobic septic system | aerobic septic tank installation | residential aeration septic system setup |
| aerobic system installer near me | certified aerobic septic installer | advanced septic system with aeration chamber |
| aerobic septic system cost | aerobic wastewater system installation price | septic permit and perc test for aerobic unit |
| commercial aerobic septic installation | aerobic septic system for business | decentralized aerobic treatment unit contractor |
FAQs About Aerobic Septic System Installation
What is an aerobic septic system?
An aerobic septic system is an onsite wastewater treatment unit that uses forced air to introduce dissolved oxygen into the aeration chamber. Aerobic bacteria and microorganisms thrive in this oxygen-rich environment and decompose organic solids far more efficiently than the anaerobic bacteria in a conventional septic tank. The result is cleaner, treated effluent with significantly lower BOD, suspended solids, and coliform counts. The difference in treatment quality is substantial.
When should I install an aerobic septic system instead of a conventional one?
You should install an aerobic system when your soil has poor permeability, your water table sits too high for a standard drain field, your property lacks adequate space for a conventional leach field, or your health department requires advanced treatment levels. New construction on unsewered lots also frequently calls for aerobic treatment units.
How long does aerobic septic system installation take?
Most residential aerobic septic system installations take three to five days from excavation through commission. Permitting and site evaluation add one to four weeks depending on your local health department’s processing timeline.
Can an aerobic system replace my failing conventional septic tank?
Yes. Our technicians routinely decommission failed anaerobic systems and retrofit the site with a new aerobic treatment unit. We evaluate whether existing components like the pump chamber or distribution box can integrate into the new design or need full replacement.
Does an aerobic septic system require ongoing maintenance?
Aerobic systems require regular maintenance. The air compressor or blower, chlorinator tablets, effluent filter, and control panel all need periodic inspection and servicing. Most health departments mandate maintenance contracts with a certified technician. Action Septic Service offers scheduled maintenance plans that keep your aerobic system compliant and functioning at peak treatment capacity.
How much does aerobic septic system installation cost?
Costs vary based on system size, brand, soil conditions, dispersal method, and local permit fees. The total cost depends on your specific property requirements. Contact Action Septic Service for a detailed, no-obligation estimate specific to your property and wastewater needs.